Call 08048976720 75% Response Rate

Send Email

LLDPE Granule

Our product range includes a wide range of 500m24a iocl lldpe injection moulding granules, reliance ll36ra045uv lldpe uv rotomoulding application, r36a050u lldpe for rotomoulding, reliance m24200 lldpe high flow grade, reliance e24065 lldpe extrusion coating and i26a500u gail lldpe granule.
500M24A IOCL LLDPE Injection Moulding Granules

500M24A IOCL LLDPE Injection Moulding Granules

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity500 Kg
BrandIOCL
ColorWhite
Usage/ApplicationPlastic Industry
Packaging Size25KG BAG (GONI)
MaterialPolypropylene
Country of OriginMade in India
Grade500M24A
FormGranules
Melt Flow Index (1900C & 2.16 Kg)50 gm/10 min
Density @ 23 deg C3 0.924 gm/cm
Tensile Yield Strength11 MPa
Elongation at Break>500 %
Flexural Modulus300 MPa
Vicat Softening Point (10 N)98 deg C
Product Description:
500M24A is a butene co monomer based Linear Low Density Polyethylene manufactured using Nova Chemicals Sclairtech Solution Polymerization Technology. 500M24A is a natural colored polymer with narrow molecular weight distribution, excellent processability and flow properties.

Recommended Applications:
LLDPE 500M24A is designed as base resin for master batches and to make molding of flat and large warpage-free products/lids.

Recommended Processing Temperature:
180 - 215 oC

Packaging Information:
This material is packed and available in raffia bags with net content of 25.0 Kg only. The raffia bags used conforms to the minimum strength requirements of BIS, however, customer shall take due care while handling the bag. Prolonged exposure of these bags to sunlight may deteriorate the bags performance and cause spillage and wastage. IOCL does not warranty loss of material due to poor material handling practices.

Storage & Handling:
Prevent LLDPE Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 oC. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. It is advised to process LLDPE material within 06 months after delivery.

Additional Information:

  • Delivery Time: 2 - 3 DAYS
  • Packaging Details: 25KG BAG (GONI) BAG SIZE 3FT BY 1.5 FT
Get Best QuoteRequest A Callback
Reliance LL36RA045UV LLDPE UV ROTOMOULDING APPLICATION

Reliance LL36RA045UV LLDPE UV ROTOMOULDING APPLICATION

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity500 Kg
Usage/ApplicationPlastic Industry
ColorNatural
Packaging TypeBag
Packaging Size25kg
Melt Flow IndexASTM D1238 gm/10 min 4.5
BrandReliance
Country of OriginMade in India
LL36RA045UV is a Butene Comonomer based Linear Medium Density Polyethylene (LLDPE). This grade is stabilised with appropriate quantity of HALS to give a long service with continuos outdoor exposure with or without blending of any carbon black. LL36RA045UV when pulverised into 20-30 mesh powder offers good processability. This grade has very good Environmental Stress Crack Resistance (ESCR) and a combination of hardness and impact strength. This grade contains normal dose ofAO and high dose of UV stabiliser. 

Additional Information:

  • Delivery Time: 2-3 Days
  • Packaging Details: 25kg Bag (Goni)
Get Best QuoteRequest A Callback
R36A050U LLDPE for Rotomoulding

R36A050U LLDPE for Rotomoulding

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity500 Kg
Usage/ApplicationPlastic Industry
ColorNatural
Packaging TypeBag
Packaging Size25kg
Melt Flow Index4.5 g/10min
BrandGail
Country of OriginMade in India
Density0.936 g/cc
R36A050U has excellent processability with good mechanical properties. It is widely used in applications that require low degree of warpage and excellent dimensional control. It is not UV Stabilized and is recommended for use with adequate amount of carbon black or UV stabilizer for outdoor applications. Typical Applications of this grade are chemical tanks, water storage tanks, loft tanks, pallets etc


Packaging & Storage: R36A050U is available in natural colour/pellet form in 25 kg strong bags made of woven fabric. The product should be stored in dry conditions at temperature below 50oC and protected from UV light.

Additional Information:

  • Delivery Time: 2-3 Days
  • Packaging Details: 25kg Bag (Goni)
Get Best QuoteRequest A Callback
Reliance M24200 LLDPE HIGH FLOW GRADE

Reliance M24200 LLDPE HIGH FLOW GRADE

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity500 Kg
Usage/ApplicationPlastic Industry
ColorNatural
Packaging TypeBag
Packaging Size25kg
Melt Flow IndexASTM D 1238 g/10 min.
BrandReliance
Country of OriginMade in India
M24200 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE) grade with narrow molecular weight distribution and optimum level of antioxidants. It offers excellent processability and is recommended as base resin for preparing masterbatch. It can also be used for producing injection moulded lids, containers, houseware & general purpose articles as this grade exhibits good flexibility and low warpage.

APPLICATIONS:
Masterbatches, Shopping baskets, Housewares, Lids  

Storage Recommendations • Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight.

Additional Information:

  • Delivery Time: 2-3 Days
  • Packaging Details: 25kg Bag (Goni)
Get Best QuoteRequest A Callback
Reliance E24065 LLDPE EXTRUSION COATING

Reliance E24065 LLDPE EXTRUSION COATING

Get Latest Price

Product Brochure

Product Details:
Minimum Order Quantity500 Kg
Usage/ApplicationPlastic Industry
ColorNatural
Packaging TypeBag
Packaging Size25kg
BrandReliance
Elongation At Break740% ASTM D 638
Country of OriginMade in India
E24065 is a Butene comonomer based Linear Low Density Polyethylene (LLDPE), and designed for extrusion coating applications in blends with LDPE.

APPLICATIONS:
Extrusion coating on HDPE woven fabric, Jute, Al foil etc. Regulatory Information • Meets the requirements stipulated in standard IS : I0146 on "Specification for Polyethylene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water". It also conforms to the positive list of constituents as prescribed in IS : 10141. The grade and the additives incorporated in it also comply with the FDA: CFR Title 21,177.1520, Olefin polymers.
Storage Recommendations
• Bags should be stored in dry/closed conditions at temperatures below 50°C and protected from UV / direct sunlight. 

Additional Information:

  • Delivery Time: 2-3 Days
  • Packaging Details: 25Kg Bag (Goni)
Get Best QuoteRequest A Callback
I26A500U Gail LLDPE Granule

I26A500U Gail LLDPE Granule

Get Latest Price

Product Brochure

Product Details:
Packaging TypeBag
Packaging Size25 kg
Melt Flow Index50 gm/10min (I2 )
BrandG-Lene
Elongation At Break120 %
Country of OriginMade in India
MaterialLLDPE
Density0.926 gm/cc
Tensile Strength at Yield98 kg/cm2
Flexural Modulus4000 kg/cm2
Vicat Softening Temperature90 Degree C
Barrel Temperature180 - 230 Degree C
Mould Temperature20 - 55 Degree C
Model NameI26A500U
ManufacturerGail India Limited
Product Description and Typical Applications:
  • I26A500U GAIL LLDPE Granule has excellent gloss and high flow. This resin has been designed to have an excellent balance of impact strength, rigidity, environmental stress crack resistance and processability. It is used in injection molded applications such as food containers, caps, closures and also, as a base resin for manufacturing masterbatches.
Get Best QuoteRequest A Callback
M26500 Reliance LLDPE Granule

M26500 Reliance LLDPE Granule

Get Latest Price

Product Brochure

Product Details:
Packaging TypePlastic Woven Sack
Packaging Size25 kg
Melt Flow Index50 G/10min (90 Degree C/2.6 kg )
BrandRelene
Country of OriginMade in India
MaterialLLDPE
Density50 g/cc( 23 Degree C)
Tensile Strength at Yield11.5 Mpa
Elongation at Yield600%
Flexural Modulus250 Mpa
Softening Point97 Degree C
Model NumberM2650
ManufacturerReliance Industries Limited
M26500 Reliance LLDPE Granule is a butene comonomer liner low density polyethylene grade with narrow molecular weight distribution and optimum level of antioxidants it offer excellant processability and is mainly recommended for preparing masterbatch. this grade can also be used for producing injection moulded lids, containers, Houseware and general purpose articles as it exhibits good flexibility, low warpage and good fluidity


Application:
  • Masterbatches, shopping basket, lid, hot melt, adhesive, powder coating

Regulatory Information
  • Meet the requirements stipulated in standard IS:10146 on specification for polyethylene for safe use in contact with food stuff pharmaceuticals and drinking water it also confirms to the positive list of constituents as prescribed in IS10141. The grade and the additives incorporated in it also comply with the FDA:CFR title 2I, I77 I520 Olefin Polymers

Storage Recommendations
  • Bags should be stored in dry/ closed conditions at temperatures below 50 Degree C and protected from UV/ Direct sunlight
Get Best QuoteRequest A Callback
White LLDPE Granule

White LLDPE Granule

Get Latest Price

Product Details:
Usage/ApplicationInjection Moulding
ColorWhite
Packaging TypeBag
Packaging Size25 kg
MaterialLLDPE
RecyclableYes
FormGranule
Thickness20 mm
Purity99 %
We are leading manufacturer and supplier a top grade of LLDPE Granules to our esteemed clients. These products are manufacturers by using high quality of material. LLDPE Granules offered by us highly appreciated by our client. These products are available in various range keeping in mind requirements of our valuable clients.

Features:

  • Supreme material quality
  • Tough and strong
  • Long lasting
  • Economical
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Looking For "LLDPE Granule"?
Thank youYour Enquiry has been sent successfully.

Reviews & Rating

4.5/5

★★★★★★★★★★

Reviewed by 47 Users

  • 5★51%
  • 4★21%
  • 3★13%
  • 2★4%
  • 1★11%
  • User Satisfaction
  • Response77%
  • Quality     87%
  • Delivery   83%

Most Relevant Reviews

D
★★★★★★★★★★
18-December-20
Daljitsingh Jagdishsingh Arora
Navi Mumbai, Maharashtra
needs improvement to judge and to trust a buyer
Delivery
Y
★★★★★★★★★★
28-September-21
YAKIN SONI
Rajkot, Gujarat
prise for pp -raffia
M
★★★★★★★★★★
13-September-21
Mohamed Tahraoui
Algeria
Response
Quality
Delivery

© Arihant Polymer. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.