- Home
- ยป
- Our Products
- »
- HDPE Granules
HDPE Granules
We are a leading Wholesale Trader of reliance 46gp003 high density polyethylene for pipe extrusion, hd50ma180 relene high density polyethylene, m5618 high density polyethylene, reliance hd53ea010 hdpe for stretched tape products, transparent hdpe granules and white hdpe granules from Mumbai, India.
Reliance 46gp003 High Density Polyethylene For Pipe Extrusion
Get Latest Price
Product Brochure
Product Details:
Minimum Order Quantity | 500 Kg |
Brand | Reliance |
Color | White |
Usage/Application | Plastic Industry |
Packaging Size | 25kg |
Plastic Material | Granules |
Grade | 46GP003 |
Density | ASTM D1505 gm/cm 0.946 |
Country of Origin | Made in India |
Description
Pipe made from 46GP003 grade passes the Internal Pressure Creep Rupture Test when tested with 5.5 MPa induced stress at 80 C for 165 hrs and with 5.7 MPa induced stress at C for 48 hrs as per clause 8.1 of IS 4984, thereby meeting the requirements of PE100 grade as per IS: 4984.
Application- PE-100 pressure pipes
Storage Recommendations
Bags should be stored in dry conditions at temperatures below 50°C and protected from UV / direct sunlight
Additional Information:
- Delivery Time: 2-3 Days
- Packaging Details: 25kg Bag (Goni)
Get Best QuoteRequest A Callback
HD50MA180 Relene High Density Polyethylene
Get Latest Price
Product Brochure
Product Details:
Brand | Relene |
Packaging Type | Plastic Woven Sack |
Packaging Size | 25 Kg |
Material | HDPE |
Density | 0.950 gm/cm3 (230 Degree C) |
Melt Flow Index | 20.0 gm/10 min (190 Degree C / 2.16 kg) |
Tensile Strength at Yield | 22 MPa |
Elongation at Yield | 12 % |
Flexural Modulus | 900 MPa |
Notches Modulus | 30 J/m |
Vicat Softening Point | 123 Degree C |
Model Number | HD50MA180 |
Manufacturer | Reliance Industries Limited |
Form | Granule |
Application
- Houseware, storage bins, thin wall moulding
- Raw material for industrial use only
Regulatory Information
- Meets the requirements stipulated in standard IS:10146 on specification for polyethylene for safe use in contact with foodstuff, pharmaceuticals and drinking water. it also confirm to the positive list of constituents as prescribed in IS:10141. the grade and the additive incorporated in it also comply with the FDA:CFR title 21,177.1520 Olefin Polymers.
Storage Recommendations:
- Bags Should MDC storage in dry/ closed condition at temperatures below 50 Degree C and protected for UV/ Direct Sunlight .
Get Best QuoteRequest A Callback
M5618 High Density Polyethylene
Get Latest Price
Product Brochure
Product Details:
Brand | Opalene |
Packaging Type | Bag |
Packaging Size | 25 kg |
Material | HDPE |
Density | 0.956 gm/cm3 (at 30 Degree C) |
Elongation at Yield | 350 % (50mm / min) |
Flexural Modulus | 850 Mpa |
Notches Modulus | 30 J/m |
Izod Impact Strength | 35 J/m (at 23 Degree C) |
Model Number | N5618 |
Hardness | 65 Shore D |
Vicat Softening Point | 122 Degree C (10N) |
Heat Deflection Temperature | 78 Degree C (0.455 Mpa) |
Form | Granule |
Melt Flow Index | 18 g / 10 min ( 190 Degree C & 2.16 kg) |
Tensile Strength at Yield | 24 MPa (50mm / min) |
Melt Flow Index ( 190o C & 2.16 kg) | 18g / 10 min |
Density (at 23 0 C) | 0.956gm/cm3 |
Tensile Strength @ Yield (50mm / min) | MPa 24.0 |
4 Elongation @ Break (50mm / min) | % 350 |
zod Impact Strength (at 23 0 C) | J/m 35 |
hardnss | Shore D 65 |
Vicat Softening Point (10N) | C 122 |
9 Heat Deflection Temperature (0.455 MPa) | C 78 |
- M5618 High Density Polyethylene is a natural colored grade produced with the latest Mitsui CX slurry polymerization
Technology exhibiting following features:
- High flow for Good Processability
- Good Rigidity
HDPE M5618 is recommended for following applications:
- Housewares, Baskets
- Buckets, Tubs
- Caps & Closures
- Thin wall drinking glass/cups
- For Industrial Use
Regulatory Requirements:
- M5618 High Density Polyethylene shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers
Storage & Handling:
- Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 o C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance.
Health and Safety Information:
- The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
HDPE M5618 is recommended for following applications: ¸ Housewares, Baskets ¸ Buckets, Tubs ¸ Caps & Closures ¸ Thin wall drinking glass/cups
Regulatory Requirements: HDPE grade M5618 shall meet the requirements stipulated in IS 10146:1982 on 'Specification of Polyethylene for safe use in contact with Foodstuff, Pharmaceutical & Drinking water'. The grade and Additives incorporated in this grade shall meet the positive list of constituents as prescribed in IS 10141:1982. The Grade and the additives incorporated in it shall also comply with the FDA: CFR Title 21,177.1520, Olefin Polymers. Storage & Handling: Prevent Polyethylene Material from direct exposure to sunlight & heat to avoid quality deterioration. The storage location should be dry, dust free and the Storage temperature should not exceed 50 o C. Non - compliance to these precautionary measures can lead to degradation of the product causing Color changes, Odor & inadequate product performance. Health and Safety Information: The product described herein may require precautions in handling and use because of toxicity, flammability, or other consideration. The Material Safety Data Sheet (MSDS) contains the available product health and safety information for this material and can be found at www.opalindia.in. Before using any material, a customer is advised to consult the MSDS for the product under consideration for use.
Get Best QuoteRequest A Callback
Reliance HD53EA010 HDPE For Stretched Tape Products
Get Latest Price
Product Brochure
Product Details:
Minimum Order Quantity | 500 Kg |
Brand | Reliance |
Usage/Application | Stretched Tape |
Color | Natural |
Density | ASTM DI505 gm/cm 0.955 |
Grade | HD53EA010 |
Material | HDPE Plastic |
Packaging Size | 25kg |
Product Type | Plastic Granules |
I Deal In | New Only |
Packaging Type | Bag |
Country of Origin | Made in India |
Additional Information:
- Delivery Time: 2-3 Days
- Packaging Details: 25Kg Bag (Goni)
Get Best QuoteRequest A Callback
Transparent HDPE Granules
Get Latest Price
Product Details:
Usage/Application | Injection and Blow Moulding |
Color | Transparent |
Material | HDPE |
Packaging Size | 25 kg |
Packaging Type | Bag |
Thickness | 10 mm |
Form | Granule |
Purity | 99 % |
Get Best QuoteRequest A Callback
White HDPE Granules
Get Latest Price
Product Details:
Usage/Application | Injection and Blow Moulding, etc |
Color | White |
Packaging Size | 25 kg |
Packaging Type | Bag |
Material | HDPE |
Thickness | 10 mm |
Form | Granule |
Purity | 99 % |
Get Best QuoteRequest A Callback
Hdpe Blow Molding Granules
Get Latest Price
Product Details:
Usage/Application | Blow Moulding |
Color | White |
Material | HDPE |
Packaging Size | 25 kg |
Packaging Type | Bag |
Thickness | 10 mm |
Form | Granule |
Purity | 99 % |
High Density Polyethylene (HDPE) grade suitable for general purpose extrusion blow moulding applications. Articles blown from this grade exhibit good stiffness. The resin offers good melt strength, ESCR and impact resistance and typically used for packaging of oil, vanaspati, general purpose containers, jerry can, etc.
Get Best QuoteRequest A Callback
Reliance 46gp009 Hdpe For Pipe Extrusion
Get Latest Price
Product Brochure
Product Details:
Minimum Order Quantity | 500 Kg |
Type | Plastic Granules |
Brand | Reliance |
Country of Origin | Made in India |
Melt Flow Index | ASTM D1238 gm/10 min 0.9 |
Density | ASTM D1505 gm/cm3 0.948 |
Applications
• Pipes for drinking water, drip irrigation and sprinkler systems
• Pipes for industrial effluent
• Pesticide bottles
Typical Process Conditions:
• Typical Process Temp (??C) - 180 – 220
Additional Information:
- Delivery Time: 2-3 Days
- Packaging Details: 25kg Bag (Goni)
Get Best QuoteRequest A Callback